spec no: dsab5907 rev no: v.11 date: apr/20/2010 page: 1 of 5 approved: wynec checked: allen liu drawn: xulina e rp: 1203000667 3.2x1.0mm right angle smd chip led lamp part number: KPA-3210CGCK green features z 3.2mmx1.0mm right angle smt led, 1.5mm thickness. z low power consumption. z wide viewing angle. z ideal for backlight and indicator. z package : 2000pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. description the green source color devices are made with algainp on gaas substrate light emitting diode. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.1(0.004") unless otherwise noted. 3.the specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. the device has a single mounting surface. the devi ce must be mounted according to the specifications.
spec no: dsab5907 rev no: v.11 date: apr/20/2010 page: 2 of 5 approved: wynec checked: allen liu drawn: xulina e rp: 1203000667 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type v iewing angle [1] min. typ. 2 1/2 KPA-3210CGCK green (algainp) water clear 18 60 120 iv (mcd) [2] @ 20ma symbol parameter device typ. max. units test conditions peak peak wavelength green 574 nm i f =20ma d [1] dominant wavelength green 570 nm i f =20ma ? 1/2 spectral line half-width green 20 nm i f =20ma c capacitance green 15 pf v f =0v;f=1mhz v f [2] forward voltage green 2.1 2.5 v i f =20ma i r reverse current green 10 ua v r =5v parameter green units power dissipation 75 mw dc forward current 30 ma peak forward current [1] 150 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c
spec no: dsab5907 rev no: v.11 date: apr/20/2010 page: 3 of 5 approved: wynec checked: allen liu drawn: xulina e rp: 1203000667 green KPA-3210CGCK
spec no: dsab5907 rev no: v.11 date: apr/20/2010 page: 4 of 5 approved: wynec checked: allen liu drawn: xulina e rp: 1203000667 KPA-3210CGCK reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) reel dimension tape dimensions (units : mm)
spec no: dsab5907 rev no: v.11 date: apr/20/2010 page: 5 of 5 approved: wynec checked: allen liu drawn: xulina e rp: 1203000667 packing & label specifications KPA-3210CGCK
|
